BLE Smoke control actuators 15 Nm / < 30 s, 105° angle of rotation
For smoke control dampers
The product may differ from the illustration
Smoke control damper actuator 90°
15 Nm, <30 s
AC/DC 24 V, Open/close, Cable 1 m
Form fit 12x12 mm, Continuous hollow shaft
Auxiliary switch 2 x SPDT (3° / 87°)
Manual override with hand crank
IP54, Direction of motion selectable by mounting L/R
Incl. Hand crank, Pointer, Protective bag
The device must not be used outside the specified field of application, especially not
in aircraft or in any other airborne means of transport.
The actuator is adapted to and installed on the smoke control damper by the
damper manufacturer. For this reason, the actuator is only supplied direct to safety
damper manufacturers. The manufacturer then bears full responsibility for the proper
functioning of the damper.
The two switches integrated in the actuator are to be operated either on power
supply voltage or at safety extra-low voltage. The combination power supply voltage/
safety extra-low voltage is not permitted.
Cables must not be removed from the device
The device may only be opened at the manufacturer’s site. It does not contain any
parts that can be replaced or repaired by the user.
The device contains electrical and electronic components and must not be disposed
of as household refuse. All locally valid regulations and requirements must be
All information applies to common Standard-Applications. Country specific regulations may require different solutions. Deviations in specific markets might be possible. The information regarding the Standard-Applications is therefore not to be seen as a warranty.
For detailed information concerning valid standards or regulations please contact the local