This website uses cookies. By using this website and navigating further, you accept these cookies.
Detailed information about the use of cookies on this website is available here.

My Profile | View Project lists / Carts | Login
Bookmark this page | My Bookmarks
Home   |    Site Map   |    Locations Worldwide   |   Lineg   |
Energy Efficiency  |  Download Center  |  Phased Out Products  |  References  |  Interesting Links  |  Awards

General Air Solutions
Safety Solutions
Fire and smoke protection
Fire damper actuators
Control and monitoring
Smoke control
BLE (15 Nm/ < 30s)
BE (40 Nm/ < 60 s)
Water Solutions
Room & System Solutions
(incl. VAV and room temperature controllers)
Bus & System Integration
Products A to Z
Send PDF data sheets

Get product brochures:
- in PDF format
Contact us!

BFG Fire damper actuators 11 Nm / 180°  For medium and large
fire and smoke dampers
 180° angle of rotation

The product may differ from the illustration

Spring-return actuator
11 Nm, 120 s, 180°
AC 230 V, open-close, 2 x SPDT
IP54, manual override with integrated position stop
Spring torque 8,5 Nm, spring running time approx. 20 s
Connection cable halogen-free
Auxiliary switch 2 x integrated, potential-free, 25°, 145°
Mechanical interface form fit 10 x 10 mm
Direction of rotation can be selected by right-hand/left-hand installation

Only available through manufacturers
of fire protection dampers
Select another actuator
Documentation for BFG230
Send PDFs for other items
Technical data, wiring diagram, dimensions (PDF - 243 kb)
 Send Data Sheet
Fire damper actuators – Technology that saves lives (PDF - 7,910 kb)
 Send Data Sheet
CE Declaration of Conformity (PDF - 22 kb)
 Send Data Sheet
Accessories for BFG230
Thermoelectrical tripping device
AC/DC 24…48 V, cable 1 m
Duct inside temperature 72 °C (colour black)
Duct outside temperature 72 °C
Probe length 65 mm
Thermoelectrical tripping device
AC/DC 24…48 V, cable 1 m, with connector plug
Duct inside temperature 72 °C (colour black)
Duct outside temperature 72 °C
Probe length 65 mm
Hand crank
for BLF, BF, BLE, BE
Hand crank
for BLF, BF, BLE, BE
Hand crank
for BLF, BF, BLE, BE
Hand crank
for BLF, BF, BLE, BE
Protective bag with wire
Recommendation for application

Regular operational checks (open-close control of the fire damper) enhance the safety of people, animals, property and the environment. Unless other requirements are stipulated – e. g. in the damper manufacturer's operating instructions – Belimo recommends the performance of monthly operational checks. Fire damper actuators from Belimo are designed in accordance with service life specifications contained in the technical datasheet for regular operational checks. Notes for regular operational checks can be found in the European Product Standard for Fire Dampers (EN 15650) under "Maintenance information".

In the case of motorised fire dampers, remote operational checks are also possible, thus lowering operating costs.
Responsibly protecting people and tangible assets
New range of fire damper actuators BFL and BFN
Fire protection scenarios
Advantages of motorised fire dampers
Safety Notes

The actuator is not allowed to be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.
Caution: Power supply voltage!
The actuator is adapted and mounted to the fire and smoke damper by the damper manufacturer. For this reason, the actuator is only supplied direct to safety damper manufacturers. The manufacturer then bears full responsibility for the proper functioning of the damper.
The device may only be opened at the manufacturer’s site. It does not contain any parts that can be replaced or repaired by the user.
The device contains electronic and electrical components and may not be disposed of with the household waste. Observe local regulations and valid laws.

Legal disclaimer

All information applies to common Standard-Applications. Country specific regulations may require different solutions. Deviations in specific markets might be possible. The information regarding the Standard-Applications is therefore not to be seen as a warranty.
For detailed information concerning valid standards or regulations please contact the local Belimo agency.

Contact | Conditions of Sale | Imprint | Privacy Policies

Copyright © 2019 BELIMO Automation AG. All rights reserved.